[Oct 12, 2024] HPE7-A03 Free Exam Questions with Quality Guaranteed
HPE7-A03 Free Exam Files Downloaded Instantly
HP HPE7-A03 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 27
ACME retail has 38 locations spread out across Ave US states and two provinces in Canada. They are looking to grow 20% over the next two years. They have an HO with a staff of 200 employees. The organization has eight Regional Managers and two VPs who work from home and the road. Stores typically have 17 employees on average per location.
The two warehouses have a remote loading system and 20 employees each to load the trucks and fulfill the online orders. The warehouse has 40-foot ceilings and large metal racks to store inventory. The main location is 240K sq ft (22300 st) m) and the Canadian warehouse Is 130K sq ft (12100 sq ml. The forkllfts on the loading docks are equipped with a wireless tablet on board.
A typical store Is reportedly about 60.000 sq ft (5575 sqm) and smaller stores are planned at 25.000 sq ft '2320 sq mi. The locations need to expand the abilities to vendors that need to add setup displays or Interactive kiosks in the stores. The current Infrastructure was installed In 2015 and used wireless N technology in a coverage model. The wiring is CatS. and they are unsure of the fiber connections. The inventory is all placed on the floor when it is delivered to the local store.
Inventory control is handled through Zebra barcode scanners, and they have had a lot of issues in getting signals throughout the stores and this makes monthly inventory difficult. The organization has a small help desk to troubleshoot issues that happen at the retail locations and PC support for the office. The company is looking to upgrade away from the current pbx system later this year. With the need to grow and cut costs, they are interested in moving the data to the cloud but need to get almost real-time inventory control for the online service to function.
The network has all been wired over the last ten years, but with the new systems being all wireless, they have seen the trend to offer wireless to all the vendors for their needs but also would like to allow employees, guests, and contractors all to use it. With the new IT director starting next week, the project has been set by the CTO of the company. The marketing group has asked how they can interact with the customers and get more info, while the IT support desk needs to cut staff in halt.
The. office has an MDF and two IDFs located on floors one and two. The HOF is in the basement, and you have multiple WAN circuits for the HO links. Each store has a local handoff from the cable company (Ethernet) In the middle of the store in the office, so distance for the wiring is not an issue.
The customer has budget concerns but does want something that could last 7+ years.
ACME Retail is using 4-post racks. Which rack mounting kit is better suited for this project?
- A. optional Aruba 2-pet Rack Mount Kit
- B. included Rack Mounting Kit
- C. optional Aruba Universal 4-post Rack Mount Kit
- D. optional Third Party 4-port Rack Mount Kit
Answer: C
Explanation:
For a large multinational retail company like ACME Retail that uses 4-post racks in their network infrastructure, the most suitable rack mounting kit would be the optional Aruba Universal 4-post Rack Mount Kit. This kit is designed to provide a secure and stable mounting solution for networking equipment in 4-post rack systems, which are commonly used in enterprise environments for their robustness and ability to support heavier equipment. The Aruba Universal 4-post Rack Mount Kit is versatile and designed to fit a wide range of Aruba switches and networking devices, making it an ideal choice for ACME Retail's project, ensuring compatibility and ease of installation across their various locations.
NEW QUESTION # 28
What are the considerations when using existing MMF and upgrading to equipment capable of 10 GbE speeds? (Select two)
- A. single fiber tube into cabinet
- B. type of fiber connector
- C. redundant fiber tube into cabinet
- D. type of MMF fiber
- E. length of MMF fiber
Answer: D,E
Explanation:
When upgrading existing Multimode Fiber (MMF) infrastructure to accommodate equipment capable of 10 GbE speeds, two primary considerations are the length of the MMF fiber (Option A) and the type of MMF fiber (Option C). The length of the fiber impacts the signal quality and bandwidth capacity, with longer lengths potentially requiring signal conditioning or different types of fiber to support higher speeds. The type of MMF fiber, such as OM1, OM2, OM3, or OM4, significantly affects its bandwidth capabilities and distance limitations at 10 GbE speeds. OM3 and OM4 fibers are designed to support 10 GbE transmissions over longer distances compared to OM1 and OM2, making them more suitable for upgrades to higher speeds.
Understanding these factors is crucial to ensure the existing fiber infrastructure can support the desired network performance without extensive modifications or replacements.
NEW QUESTION # 29
Which alternative source is best suited for site surveys or simul-ations if no floor plans are available?
- A. Google Maps
- B. simple wall drawings
- C. tire escape plan
- D. blank sheet of paper
Answer: C
Explanation:
When floor plans are not available for site surveys or simulations, the best alternative source to use is the fire escape plan (Option D). Fire escape plans are typically available in most buildings and provide a simplified layout of the premises, including walls, doors, and sometimes the location of permanent fixtures. While not as detailed as architectural floor plans, fire escape plans can offer enough information for initial site survey estimations and RF planning. They allow network designers to understand the basic layout and potential RF obstacles or coverage areas, making them a practical tool for preliminary wireless network planning and simulations in the absence of more detailed floor plans.
NEW QUESTION # 30
What possible issue with the cote switch selection do you see in regards to the customers' requirements?
- A. The cote switch will have a lot of unused ports.
- B. The cote switch will not have enough ports for VSX links.
- C. The core switch will not support the 25GbE downlinks to the distribution switches.
- D. The cote switch will not support the 10GbE downlinks to the cabins and technical rooms.
Answer: C
Explanation:
In the scenario described, the most significant issue with the core switch selection, according to Aruba Campus Access learning resources, is answer A: "The core switch will not support the 25GbE downlinks to the distribution switches." This is a critical consideration because the bandwidth capabilities between the core and distribution layers significantly impact the overall network performance and scalability. If the core switch cannot support 25GbE downlinks, it may create a bottleneck, preventing the distribution switches from operating at their full capacity and affecting the performance of connected devices and applications. Ensuring the core switch has the necessary port speeds and densities to support the intended design and traffic patterns is crucial in network design, as emphasized in Aruba's documentation on campus network architectures.
NEW QUESTION # 31
A customer wants to have the ability to show network usage. Which product would allow them to have this visibility?
- A. Aruba OS 8.X
- B. UXI
- C. Central
- D. ClearPass
Answer: C
Explanation:
Aruba Central provides a cloud-based management platform for managing and monitoring Aruba Instant APs, switches, and branch gateways. It offers a comprehensive dashboard that gives insights into network usage, health, and performance metrics. Central allows network administrators to have visibility over their entire network infrastructure from a single pane of glass, including detailed usage statistics, which can be broken down by device, application, and time. This visibility into network usage is crucial for optimizing network performance, planning capacity, and understanding user behavior. Aruba Central's analytics and reporting capabilities enable customers to track and analyze network usage, making it the appropriate product choice for customers wanting to monitor their network usage closely.
NEW QUESTION # 32
ACME retail has 38 locations spread out across Ave US states and two provinces in Canada. They are looking to grow 20% over the next two years. They have an HO with a staff of 200 employees. The organization has eight Regional Managers and two VPs who work from home and the road. Stores typically have 17 employees on average per location.
The two warehouses have a remote loading system and 20 employees each to load the trucks and fulfill the online orders. The warehouse has 40-foot ceilings and large metal racks to store inventory. The mainlocation is 240K sq ft (22300 st) m) and the Canadian warehouse Is 130K sq ft (12100 sq ml. The forkllfts on the loading docks are equipped with a wireless tablet on board.
A typical store Is reportedly about 60.000 sq ft (5575 sqm) and smaller stores are planned at 25.000 sq ft '2320 sq mi. The locations need to expand the abilities to vendors that need to add setup displays or Interactive kiosks in the stores. The current Infrastructure was installed In 2015 and used wireless N technology in a coverage model. The wiring is CatS. and they are unsure of the fiber connections. The inventory is all placed on the floor when it is delivered to the local store.
Inventory control is handled through Zebra barcode scanners, and they have had a lot of issues in getting signals throughout the stores and this makes monthly inventory difficult. The organization has a small help desk to troubleshoot issues that happen at the retail locations and PC support for the office. The company is looking to upgrade away from the current pbx system later this year. With the need to grow and cut costs, they are interested in moving the data to the cloud but need to get almost real-time inventory control for the online service to function.
The network has all been wired over the last ten years, but with the new systems being all wireless, they have seen the trend to offer wireless to all the vendors for their needs but also would like to allow employees, guests, and contractors all to use it. With the new IT director starting next week, the project has been set by the CTO of the company. The marketing group has asked how they can interact with the customers and get more info, while the IT support desk needs to cut staff in halt.
The. office has an MDF and two IDFs located on floors one and two. The HOF is in the basement, and you have multiple WAN circuits for the HO links. Each store has a local handoff from the cable company (ethernet) In the middle of the store in the office, so distance for the wiring is not an issue.
The customer has budget concerns but does want something that could last 7+ years.
The customer would like to host all the applications at the HO Data Center. Which design would meet the customer's requirements?
- A. Aruba 10K switch with Pensando
- B. Aruba SO-Branch Architecture
- C. Aruba UXI Sensors
- D. Aruba Instant OS access points
- E. HPE Comware switches
Answer: B
Explanation:
For ACME Retail, which aims to host all applications at the HO Data Center and has multiple locations spread across different geographical areas, the Aruba SD-Branch Architecture would be the most suitable design to meet their requirements. This architecture provides a simplified, integrated branch networking solution combining SD-WAN, LAN, and security features. It enables centralized management and control, allowing ACME Retail to efficiently route traffic from branch locations to the HO Data Center, ensuring secure and reliable access toapplications. The SD-Branch solution can accommodate the company's growth and adapt to changing network demands, making it an ideal choice for a scalable and flexible network infrastructure that supports ACME Retail's business objectives.
NEW QUESTION # 33
The customer recently found out that Aruba OS-CX switches are capable of Application Recognition. What requirements should be fulfilled in order to do this? (Select two.)
- A. 8360 with Aruba CX Advanced License
- B. 6200F/M with Aruba CX Advanced License
- C. 6300F/M with Aruba CX Advanced License
- D. 6400 with Aruba CX Advanced License
Answer: D
Explanation:
Aruba OS-CX switches, specifically the Aruba 6400 and 6300F/M models, are designed to support advanced networking features, including Application Recognition, with the Aruba CX Advanced License. The Advanced License enables enhanced capabilities such as deeper visibility into application flows, advanced routing features, and improved network analytics. Application Recognition allows these switches to identify and classify applications running on the network, enabling more intelligent and dynamic network policies and improving overall network performance and security. The requirement for an Aruba CX Advanced License on these specific models ensures that the necessary software features and support are available to leverage Application Recognition capabilities effectively.
NEW QUESTION # 34
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will beout of scope for this project. The customer is underserved by its existing L2-based network infrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of "smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics, and other location-based services The client would like to ensure full wireless coverage in its 40 m x 40 m i 130 ft x 130 ft) auditorium during company functions while maintaining the fewest APs for aesthetic purposes WI-FI6 APs are a minimum requirement.
Which AP series would you use In the auditorium's 1.000 seats with a maximum take rate of 80%?
- A. AP577
- B. AP635
- C. AP555
- D. AP515
Answer: B
Explanation:
The Aruba AP-635 is a Wi-Fi 6 (802.11ax) access point, designed for high-density environments such as auditoriums. It is capable of providing high throughput and efficient airtime fairness to a large number of clients, which makes it suitable for an auditorium setting with 1,000 seats and a high take rate. The AP-635's advanced capabilities, including OFDMA and MU-MIMO, allow it to handle multiple simultaneous connections efficiently, ensuring robust wireless coverage and performance during company functions, all while keeping the number of APs to a minimum to satisfy aesthetic concerns.
NEW QUESTION # 35
Which member types requirea reboot when doing an In-Service-Software-Upgrade within a VSF stack?
- A. Member
- B. Standby
- C. Conductor
- D. all member types
Answer: B
Explanation:
In a Virtual Switching Framework (VSF) stack, the standby member requires a reboot when performing an In-Service Software Upgrade (ISSU). This process allows for the software of the networking devices in the VSF stack to be updated with minimal disruption to the network. The standby member in a VSF configuration is rebooted to apply the new software version while the active member continues to handle the network traffic, ensuring continued operation of the network. This approach minimizes downtime during the upgrade process, which is critical for maintaining network availability and performance.
NEW QUESTION # 36
What documents should be included in the solution proposal? (Place the correct items into the list at the right.
Order is not important. Not all options will be used)
Answer:
Explanation:
Explanation:
For the solution proposal, the documents that should typically be included are:
* Architect's notes from meetings
* As-built rack drawings
* Assumptions documented in design
* Bill of materials
* Data sheets of equipment proposed
* Proposed topology diagram
* Quote
NEW QUESTION # 37
A global furniture retail company called 'No-Stair Inc.' requests you design their new WLAN infrastructure for a global footprint. Each location of No-Stair Inc.' has a similar layout: three small manager offices, a warehouse, and a 'retail' area. The 'retail' area and the warehouse together amountto 95% of the location. The IT department of the company Is minimally engaged In their LAN refresh so the CTO of the company has shared the information below Current WLAN Infrastructure Is based on the 802.1 In "WlF14Less" access-points series (both model
2013-INT (2.4 only Internal antenna) and model 2019-EXT (dual-band external antenna only)). These AP models are standalone without any centralized management. Last year 'No-Stair InC ran a project called secure. It' ensuring that all needed network security was Implemented to be fully compliant with their security standards. During this project, they also upgraded the AAA infrastructure to handle the Increased AAA requests. No additional Wi-Fi or security requirements are listed for this WLAN refresh, which means that
'No-Stair Inc.' will continue to use bridged SSIDs. with local breakout into different VLANs.
The CTO of No-Stair Inc.' understands the need for you to ask additional questions to deliver the design The questions may be sent in written form and will be answered within two weeks.
What additional question needs to be answered in order to collect needed information for tie WLAN design?
- A. What type or fiber connection it used between the core and access layer switches?
- B. Is there enough cooling in the MOF?
- C. Does the existing wired network support enough drops for an upgraded Wi-Fi Network?
- D. Who Is the campus switch vendor?
Answer: C
Explanation:
When upgrading a WLAN infrastructure, it's important to ensure that the existing wired network can support the new wireless access points (APs) in terms of connectivity and power (if using Power over Ethernet, PoE).
For 'No-Stair Inc.,' which is planning a WLAN refresh without specific changes to the Wi-Fi or security requirements but potentially with new AP models and configurations, verifying the capacity of the wired network is crucial. The question about whether the existing wired network has enough drops (ethernet connections) for the upgraded Wi-Fi network addresses this concern. It's essential to ensure that there are sufficient ethernet ports available in the right locations to connect the new APs, and that these ports can provide the necessary power and data rates required by modern APs. This information will help in planning the deployment of the new APs, avoiding potential bottlenecks and ensuring that the upgraded WLAN can deliver the desired performance and coverage
NEW QUESTION # 38
What is the best practice for using VSX at the core of a 3-tier design?
- A. You should Implement VSX at the core when the aggregation layer operates at layer 2 only.
- B. You should never implement VSX at the core of a 3-tier redundancy core.
- C. VSX-lags allow the collapsed core to connect directly to services such as gateways and services only so long as spanning tree is used to prevent loops.
- D. You should implement VSX at the core when the aggregation layer is layer 3 only with OSPF-routed traffic forwarding Between the core and aggregation layers.
Answer: D
Explanation:
In a 3-tier network design consisting of core, aggregation, and access layers, the implementation of Virtual Switching Extension (VSX) at the core is considered a best practice when the aggregation layer functions primarily at Layer 3 with routing protocols like OSPF facilitating traffic forwarding between the core and aggregation layers. This design choice, as verified by Aruba Campus Access documents, leverages the high availability and redundancy features of VSX technology while maintaining efficient and scalable routing at the aggregation layer. Implementing VSX at the core in such a scenario ensures seamless failover and redundancy, minimizing the risk of downtime and ensuring consistent performance across the network. The core layer, equipped with VSX, provides a robust and resilient backbone for the network, facilitating efficient traffic management and routing decisions, which is critical for large-scale enterprise networks.
NEW QUESTION # 39
ACME retail has 38 locations spread out across Ave US states and two provinces in Canada. They are looking to grow 20% over the next two years. They have an HO with a staff of 200 employees. The organization has eight Regional Managers and two VPs who work from home and the road. Stores typically have 17 employees on average per location.
The two warehouses have a remote loading system and 20 employees each to load the trucks and fulfill the online orders. The warehouse has 40-foot ceilings and large metal racks to store inventory. The main location is 240K sq ft (22300 st) m) and the Canadian warehouse Is 130K sq ft (12100 sq ml. The forkllfts on the loading docks are equipped with a wireless tablet on board.
A typical store Is reportedly about 60.000 sq ft (5575 sqm) and smaller stores are planned at 25.000 sq ft '2320 sq mi. The locations need to expand the abilities to vendors that need to add setup displays or Interactive kiosks in the stores. The current Infrastructure was installed In 2015 and used wireless N technology in a coverage model. The wiring is CatS. and they are unsure of the fiber connections. The inventory is all placed on the floor when it is delivered to the local store.
Inventory control is handled through Zebra barcode scanners, and they have had a lot of issues in getting signals throughout the stores and this makes monthly inventory difficult. The organization has a small help desk to troubleshoot issues that happen at the retail locations and PC support for the office. The company is looking to upgrade away from the current pbx system later this year. With the need to grow and cut costs, they are interested in moving the data to the cloud but need to get almost real-time inventory control for the online service to function.
The network has all been wired over the last ten years, but with the new systems being all wireless, they have seen the trend to offer wireless to all the vendors for their needs but also would like to allow employees, guests, and contractors all to use it. With the new IT director starting next week, the project has been set by the CTO of the company. The marketing group has asked how they can interact with the customers and get more info, while the IT support desk needs to cut staff in halt.
The. office has an MDF and two IDFs located on floors one and two. The HOF is in the basement, and you have multiple WAN circuits for the HO links. Each store has a local handoff from the cable company (ethernet) In the middle of the store in the office, so distance for the wiring is not an issue.
The customer has budget concerns but does want something that could last 7+ years.
Based on the best practices and customer requirements, what is the correct WLAN approach?
- A. Aruba OS10 AP and gateway deployment
- B. Aruba OS10 AP only deployment
- C. Aruba OS8 campus deployment
- D. Instant OS 8 deployment
Answer: D
Explanation:
For ACME Retail, which has multiple locations and a mix of environments including high-ceiling warehouses and retail spaces, an Aruba Instant OS 8 deployment is a suitable WLAN approach. Aruba Instant OS provides a controller-less architecture, which simplifies the deployment and management of the wireless network, especially across multiple sites. This approach enables ACME Retail to manage their entire wireless network from a single interface without the need for dedicated hardware controllers, reducing costs and complexity.
Instant OS also supports advanced features like Adaptive Radio Management and ClientMatch to ensure optimal performance in diverse environments, making it an effective solution for ACME's varied locations and requirements.
NEW QUESTION # 40
A global cruise line company needs to refresh its current fleet. They win refresh the insides' of the ship to be cost-effective and increase their sustain ability. They Mill replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh Us current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware.
They start with the smallest ship with a maximum of 800 guests
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins. 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF. of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (930 ft) and the type used is 0S1. Each cabin is connected by a single
0M2 pair to the IDF. the maximum length is 60 meters (200 ft). Each technical room is connected by a single
0M2 pail to the IDF. with lengths between 100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbEto handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN Infrastructure is based on the 200/300 series Indoor and outdoor APs running instantOS (less than 300 APs).
the customer has no change in WLAN requirements.
The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because Internet connection is guaranteed.
Based on the best practices, what should you recommend as the correct optic type for the connection between the IDF and the cabins?
- A. Aruba 106 SFP- LC LRM 220 m MMF Transceiver
- B. Aruba 10GBASE-T SFP- RJ--35 30 m Cat6A Transceiver
- C. Aruba 106 SFP- LC SR 300 m MMF Transceiver
- D. Aruba 10G LC BiDi 40 km-D 1330/1270 XCVR
Answer: C
Explanation:
For the connection between the IDF and the cabins, which requires supporting distances up to 60 meters on OM2 fiber, the most appropriate optic type is the Aruba 10G SFP+ LC SR 300 m MMF Transceiver. This transceiver is compatible with multi-mode fiber (MMF) and is capable of supporting the required distance for connections to the cabins, making it a suitable choice based on the company's existing cabling structure and the need for 10GbE uplink capabilities to manage increased network traffic. The SR (Short Range) designation indicates that this transceiver is optimized for short to medium distances, which aligns with the maximum
60-meter distance from IDF to cabins, ensuring reliable and high-speed connectivity for the ship's LAN infrastructure within the given physical constraints.
NEW QUESTION # 41
You ate presenting your network design solution to your customer. What Is important to include in your presentation?
- A. your rollback plan
- B. protocols that will be used to make your solution work
- C. tangible and intangible returns for the customer
- D. your experience with this kind of project
Answer: C
Explanation:
When presenting a network design solution to a customer, it is crucial to focus on the benefits that the solution will bring to their business. This includes both tangible returns, such as cost savings, increased efficiency, and improved performance, and intangible returns, such as enhanced security, scalability, and user satisfaction.
Highlighting how the solution addresses the customer's specific needs and challenges, and how it aligns with their business objectives, helps in demonstrating the value of the solution and facilitates decision-making.
Including tangible and intangible returns in the presentation makes it more compelling and relevant to the customer's business goals, thereby increasing the likelihood of the proposal's acceptance.
NEW QUESTION # 42
What is one use case for designing a 2-tier campus LAM instead of using a 3-tier?
- A. The campus has small buildings with only a few wiring closets.
- B. The network has grown beyond a few building aggregation points
- C. Cross-campus traffic has grown beyond We capacity of a single collapsed core
- D. Access aggregation points are not scaling to meet traffic demands.
Answer: A
Explanation:
A 2-tier campus LAN architecture, consisting of the core and access layers, is typically suitable for smaller campuses or networks with limited numbers of wiring closets. This simplified architecture eliminates the need for a dedicated aggregation layer, which is more common in larger, more complex network environments (the
3-tier architecture). In a small campus setting with only a few wiring closets, a 2-tier design can provide sufficient performance and scalability, reducing complexity and potentially lowering costs. This architecture allows for direct connectivity between the access layer, where end devices connect to the network, and the core layer, which routes traffic to and from the campus network. The use of a 2-tier architecture in such scenarios is driven by the network's size and the simplicity of its requirements, making it an efficient and effective choice.
NEW QUESTION # 43
Which licenses are needed in order to use the UXl Client on Zebra (Devices? (Select two.)
- A. UXl LTE Subscription
- B. Wireless Insights
- C. UXl Agent Subscription
- D. UXI Cloud Subscription
Answer: C,D
Explanation:
To utilize the UXI Client on Zebra Devices, the necessary licenses include the UXI Cloud Subscription (Option A) and the UXI Agent Subscription (Option B). The UXI Cloud Subscription provides access to the UXI platform's cloud-based analytics and insights, facilitating the monitoring and management of network performance and user experience. The UXI Agent Subscription is required for each Zebra device, enabling it to run the UXI Client software that collects and sends network performance data to the UXI cloud platform.
Together, these licenses empower organizations to enhance network visibility and improve the user experience on Zebra devices within their networks.
NEW QUESTION # 44
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will be out of scope for this project. The customer is underserved by its existing L2-based network infrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors.
Thecorporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of "smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics, and other location-based services The client decided that they would like to manage two wiring closets as a single stack with a total of 10 switches and a minimum transport speed or 25Gbps over OM4 MM fiber They would also like to keep the stacking cabling cost to a minimum.
Which stacking components would be required to meet the customer's requirements in the most cost-effective way if the closets were 190 m (620 ft) apart? (Select two.)
- A. SFP28 transceivers
- B. 25GDAC cables
- C. 50GDAC cables
- D. SFP56 transceivers
Answer: A,D
Explanation:
To meet the customer's requirement of managing two wiring closets as a single stack with a minimum transport speed of 25Gbps over OM4 MM fiber, especially when the closets are 190m apart, the most cost-effective solution would involve using SFP transceivers. SFP28 transceivers can support speeds up to
25Gbps, aligning with the customer's minimum speed requirement. For higher speeds or future-proofing, SFP56 transceivers, which can support speeds up to 50Gbps, could also be considered. Both types are compatible with OM4 multimode fiber, which is capable of supporting these high speeds over the distance specified. DAC (Direct Attach Cable) solutions like options A and C would not be feasible due to the 190m distance between the closets, as DAC cables are typically used for much shorter distances.
NEW QUESTION # 45
A global cruise line company needs to refresh its current fleet. They win refresh the insides' of the ship to be cost-effective and increase their sustain ability. They Mill replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh Us current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware.
They start with the smallest ship with a maximum of 800 guests
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins. 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF. of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (930 ft) and the type used is 0S1. Each cabin is connected by a single
0M2 pair to the IDF. the maximum length is 60 meters (200 ft). Each technical room is connected by a single
0M2 pail to the IDF. with lengths between 100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbEto handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN Infrastructure is based on the 200/300 series Indoor and outdoor APs running instantOS (less than 300 APs).
the customer has no change in WLAN requirements.
The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because Internet connection is guaranteed.
The week after the presentation of your design to the CIO of the cruise line company, the CIO calls you to discuss increasing the security of the wired network Infrastructure. Since one of their competitors had one of their cruise ships cyber hacked, the CSO of the cruise line has mandated increased security on the wired network. They have heard about dynamic segmentation and central and decentral overlay networks.
What would you advise as the most cost-efficient solution?
- A. Standardize on Aruba 6300 switches for the access layer, add a cluster of 9240 GWs. and Implement central overlay networks on UBT basis.
- B. Standardize on Aruba 6100 switches for the access layer, add a cluster of 9240 GWs. and Implement central overlay networks on UBT basis.
- C. Standardize on Aruba 6200 switches for the access layer, add a cluster of 9240 GWs. and Implement central overlay networks on UBT basis.
- D. Standardize on Aruba 6000 switches for the access layer, add a cluster of 9240 GWs. and Implement central overlay networks on UBT basis.
Answer: A
Explanation:
Given the need to increase the security of the wired network infrastructure while being cost-efficient, advising the cruise line company to standardize on Aruba 6300 switches for the access layer is the most appropriate solution. The Aruba 6300 Series offers advanced features suitable for such environments, including high-performance, scalability, and enhanced security capabilities. Adding a cluster of 9240 Gateways for implementing central overlay networks on a User-Based Tunneling (UBT) basis further strengthens the network's security posture. This setup supports dynamic segmentation, which allows for the enforcement of consistent policies and secure access across the network, irrespective of the user or device type. This architecture not only meets the increased security requirements set forth by the cruise line's CSO but also aligns with the company's existing infrastructure and future refresh plans, ensuring cost-efficiency and sustainability.
NEW QUESTION # 46
A global cruise line company needs to refresh its current fleet. They win refresh the insides' of the ship to be cost-effective and increase their sustain ability. They Mill replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh Us current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware.
They start with the smallest ship with a maximum of 800 guests
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins. 100 technical rooms). The Core switches arelocated in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF. of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (930 ft) and the type used is 0S1. Each cabin is connected by a single
0M2 pair to the IDF. the maximum length is 60 meters (200 ft). Each technical room is connected by a single
0M2 pail to the IDF. with lengths between 100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbEto handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN Infrastructure is based on the 200/300 series Indoor and outdoor APs running instantOS (less than 300 APs).
the customer has no change in WLAN requirements.
The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because Internet connection is guaranteed.
Based on the best practices, what should you recommend as the most cost-effective switch model for the cabins?
- A. HPE Aruba Networking 6100126 Classd PoE 26/2SFP+
- B. HPE Aruba Networking 6200F 12g Class4 PoE 2G/2SFP+
- C. HPE Aruba Networking 6000 126 Class4 PoE 2G/2SFP
- D. HPE Aruba Networking 6100 246 Class4 PoE 45FP+
Answer: B
Explanation:
For the cabin switches in the global cruise line's fleet refresh project, the most cost-effective switch model that meets the requirement for fan-less operation, 10GbE uplink capability, and PoE support is the HPE Aruba Networking 6200F 12G Class4 PoE 2G/2SFP+. This switch model offers a compact form factor with sufficient port density for cabin connectivity, Power over Ethernet for powering devices directly through the network cable, and SFP+ ports for high-speed uplink connections to the distribution switches. This choice is in line with the company's aim to upgrade the network infrastructure to handle increased traffic while maintaining a focus on cost-effectiveness and sustainability. The 6200F series is designed for exactly such environments, providing reliable performance and energy efficiency, which is crucial for the limited space and power availability in a ship setting.
NEW QUESTION # 47
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will be out of scope for this project. The customer is underserved by its existing L2-based network infrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of "smart office' technology. These improvements will drive blue-dot wayfinding. presence analytics, and other location-based services The client would like 10 include Blue Dot wayfinding for their carpeted office space. The retail floors are not currently in scope What would be needed to ensure proper licensing of the solution?
- A. Qty 4 Meridian Blue Dot subscriptions
- B. Qtyl Meridian Tracking subscription
Qty 1 Meridian Blue Dot subscription - C. Qty 1 Meridian Blue Dot subscription
- D. Qty 4 Meridian Map subscriptions
Qty 4 Meridian Blue Dot subscriptions
Answer: C
Explanation:
For implementing Blue Dot wayfinding in the carpeted office space of the multinational financial institution, a Meridian Blue Dot subscription is essential. Meridian's Blue Dot wayfinding technology allows for real-time indoor navigation, which can enhance the experience of employees and visitors by providing turn-by-turn directions within the office space. Given that the requirement is specifically for the carpeted office space and not for the retail floors, a single Meridian Blue Dot subscription would be the starting point to enable this functionality. This subscription would cover the deployment of the Blue Dot technology across the specified office floors, allowing for the integration of this feature into the institution's app or digital platform for indoor navigation. Additional subscriptions, such as Meridian Map subscriptions, might be required for more extensive mapping needs, but based on the provided options and the specific request for Blue Dot functionality, a single Blue Dot subscription would be the most direct answer.
NEW QUESTION # 48
You hired a junior engineer to assist you with a large-scale network infrastructure project. The engineer has never worked on such a complex project before and wants to better understand the role that each stakeholder will play in the project.
What is the role of the Network Designer/Architect in this project?
- A. responsible for establishing security policy and selecting security controls for the infrastructure
- B. responsible 'or supporting, troubleshooting, and monitoring the wired/wireless infrastructure
- C. responsible for authoring the low-level design and creating the configuration to meet the technical requirements
- D. responsible for Investigating IDS/IPS Incidents and managing firewalls
Answer: C
Explanation:
The role of the Network Designer/Architect in a large-scale network infrastructure project is to develop a detailed technical design that meets the project's requirements. This involves authoring the low-level design documents, which include detailed network diagrams, device configurations, and implementation guidelines.
The Network Designer/Architect must understand the technical specifications and business goals to create a solution that is not only technically sound but also aligned with the organization's objectives. This role is critical inensuring that the network infrastructure is designed to be scalable, reliable, and secure, providing a solid foundation for the organization's operations.
NEW QUESTION # 49
What is the difference between 0M4 and 0M5 cabling? (Select two)
- A. 0M4 supports distances up to 100 m. while 0M5 supports distances up to 150 m using 100 GBps transceivers.
- B. 0M5 supports speeds up to 100 Gbps. while OM4 does not.
- C. 0M5 supports Multiplexing operating in the 850 to 950 nm range, while 0M4 does not
- D. 0M5 is approved as wide Band Multimode Fiber (WBMMF). while 0M4 Is not.
Answer: A,D
Explanation:
The primary differences between OM4 and OM5 cabling include their support for transmission distances and the type of multimode fiber. OM4 fiber supports distances up to 100 meters when using 100 Gbps transceivers (Option A), which is suitable for most data center and enterprise networking applications. OM5, also known as Wide Band Multimode Fiber (WBMMF) (Option C), extends this capability by supporting higher wavelengths in the 850 to 950 nm range, allowing for more efficient multiplexing and potentially longer distances or higher bandwidths under certain conditions. This makes OM5 a more versatile and future-proof option for organizations looking to deploy advanced technologies like shortwave division multiplexing.
NEW QUESTION # 50
......
Q&As with Explanations Verified & Correct Answers: https://vceplus.actualtestsquiz.com/HPE7-A03-test-torrent.html
